| Customization: | Available |
|---|---|
| After-sales Service: | Quality Assurance |
| Waterproof Rating: | IPX-4 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Three-roll Symmetrical Hydraulic Plate Rolling Machine
The Three-roll symmetrical hydraulic plate rolling machine has superior performance, compact structure and convenient operation.The upper roll lifting and overturning devices are driven by hydraulic pressure, and the main drive is driven by the motor through the triangle belt transmission reducer to drive the two lower rollers. The rolling flexibility is good. The upper roll lifting adopts displacement sensor to detect the digital display table, which can directly observe the upper roll working displacement to improve product efficiency and product quality.
1, Upper roll lifting device
Double cylinder direct drive, its maximum working pressure is 18.5mpa.The upper roller is equipped with rolling bearings and bearing seats at both ends, and the piston rod moves up and down through the bearings and along the vertical guide rail of the support. The bearing seats at both ends are equipped with displacement sensors to detect the lifting positions of the upper roller at both ends, which are displayed by digital display table.
The upper roller adopts drum-shaped roller to adjust with the supporting roller to improve the accuracy of products.
2, Lower roll drive device
The power of the lower roll driving motor is transmitted to a three-level gear reducer with hard tooth surface through the triangle belt. The hard tooth surface reducer drives the lower roll gear to rotate the lower roll through the output shaft gear, and the lower roll brake is hydraulically locked by the reducer shaft.
3, Tipping device
Tipping device is a hydraulic cylinder, according to the connecting rod mechanism to drive the overturned side of the upper roller bearing seat, the bearing seat overturned or closed, the cylinder power from the hydraulic power station.
4, Upper roll balancing device
The upper roll is raised to the highest position, and the upper roll tail is pressed by the balance beam at the tail of the upper roll, so that the upper roll is in balance through the bearing seat and the balance beam, which is easy to overturn and close the bearing seat.When the upper roll rises to the highest position, it can be detected by the travel switch.
5, Base plate
Adopts welded closed frame chassis, which has good bending and torsion resistance, large moment of inertia, and is convenient for machine installation and handling.
6, Hydraulic system
The hydraulic system is composed of gear pump, valve set, auxiliary fittings and so on.
7, Electrical control system
The electronic control system of the equipment consists of an electric control cabinet and a hand-held button box.Main switch has short circuit protection and main motor overload protection function.
| Model | Max.rolling thickness(mm) | Plate width(mm) | Diameter of upper roller(mm) | Main motor power(kw) | ||||||
| W11NC-25*2000 | 25 | 2000 | 320 | 15 | ||||||
| W11NC-25*2500 | 25 | 2500 | 380 | 15 | ||||||
| W11NC-30*2000 | 30 | 2000 | 360 | 15 | ||||||
| W11NC-30*2500 | 30 | 2500 | 420 | 22 | ||||||
| W11NC-30*3000 | 30 | 3000 | 450 | 30 | ||||||
| W11NC-40*3000 | 40 | 3000 | 540 | 37 | ||||||
| W11NC-50*3000 | 50 | 3000 | 580 | 45 | ||||||
| W11NC-60*3000 | 60 | 3000 | 660 | 55 | ||||||
| W11NC-70*3000 | 70 | 3000 | 710 | 55 | ||||||
| W11NC-80*3000 | 80 | 3000 | 770 | 75 | ||||||
| W11NC-90*3000 | 90 | 3000 | 820 | 75 | ||||||
| W11NC-100*3000 | 100 | 3000 | 860 | 90 | ||||||
| W11NC-110*3000 | 110 | 3000 | 900 | 90 | ||||||
| W11NC-120*3000 | 120 | 3000 | 950 | 110 | ||||||
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
Our Services & Strength
*We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost
and higher efficiency construction/fabrication method and better quality during phase of project bidding.
*Based client's facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality,cost and productivity to guarantee production pace is accordance with project requirement.
*To support project execution,we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools,equipment/machines to special merchandise.With flexibility,we are also glad to perform as procurement agent in China to seek required supply resources.
Q:Who are we?
A, We have 3 share joint factoys in China with total around 10000 square meters with more than 150 peoples.
Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent
Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.
Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.
Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.
Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .
Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine.
Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.
Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .
we wish to know the below:your details address,phone/fax number,destination,transportation way;
Product informaiton:item number,size,quantity,logo,etc
){kind=link}