CNC Gouge and Grinding Machine
Circumferential and Longitudinal Seam Gouge and Grinding Machine
I.Product introduction
The machine consists of CNC cross manipulator, multifunctional powerful grinding abrasive wheel and belt head, dust removal system,electronic system and pneumatic control system.
*Application
1.Carbon steel , Stainless steel circumferential seam gouge, grinding and polishing.
2.Vessel internal stainless steel cladding welding layer grinding and polishing
3.Vessels internal and external circumferential, longitudinal seam, weld reinforcement part grinding and polishing. Use before vessel fitting-up.
4.V bevel type vessel.
*Detailed Image
1.It consists of base hold, level adjustment unit, column, rotating device, power driving system, Mechanical locking mechanism,cross slider/carriage, beam and related moving system. Rotating device between Base hold and column is driving by electricity.
2.Cross slider utilize reducer and Ball screw drive to control up and down. Beam front and back moving is driven by reducer motor and gear rack.
3.Column and beam guide rails are the oversea imported heavy load straight guide. Beam both ends can be equipped with multifunctional and powerful abrasive wheel and belt,dust removal system while it is also considered to leave other grinding &gouge head interfaces.
4.There is lift lugs beside column end which is a fixed type. Overhead head crane can lift without steel wire.
5.Cross sliders are installed with dust protection unit.
6.Staircases are provided on column for maintenance.
7.The deflection can be removed by grinding & gouge head constant pressure relocation mechanism.
II.Product parameter
| Main technical parameter |
|
| Minimum height of Grinding & gouge head to ground |
800mm |
| Maximum Height |
5000 mm |
| Vertical moving maximum speed |
100~1200mm /min(frequency control) |
| Horizontal moving distance |
5000 mm |
| Maximum horizontal moving speed |
100~1200mm /min(frequency control) |
| Beam rotating degree allowed |
±90° |
| Column rotating available allowed |
±180° |
| The beam deflection |
2.5mm/m |
| Gouge function technical data |
|
| Maximum gouge depth for weld |
170mm |
| Maximum gouge depth for one-pass gouge |
≤15mm |
| Moving speed |
1000mm/min (To avoid surface damage, we suggest to use small gouge blade to move fast to treat small pieces gouge |
| Maximum gouge size of welding seam |
100×15mm |
| Maximum allowance for single time gouge |
≤100×5mm |
| Moving speed while abrasive belt grinding |
350mm/min |
| Maximum allowance for gouge cladding welding layer |
≥0.5mm/time(efficiency:10~20m/h) |
| Maximum tilt angle of welding seam bevel gouge abrasive belt |
10° |
| Gouge surface quality |
|
| Welding pass grind and gouge |
≤Ra6.3μm |
| Welding root grind and gouge |
≤Ra12.5μm |
| Cladding welding layer grind and gouge |
≤Ra6.3~0.4μm |
| Bevel grind and gouge |
≤Ra6.3μm |
| Multifunctional powerful lateral grinding & gouge head |
|
| Vertical rotating angle of grinding & gouge head |
0~90° |
| Horizontal rotating angle of grinding & gouge head |
±90° |
| Grinding & gouge head right/left moving distance |
±75mm |
| Side swing distance |
±50mm |
| Grinding & gouge head blade lifting stroke |
180mm |
| Connection wheel size |
300×100mm |
| Abrasive belt size |
100 ×2800mm |
| Abrasive belt speed |
30m/s |
| Abrasive wheel size |
650×12(12 ~ 22)mm |
| Maximum Abrasive wheel grinding and gouge speed |
65m/s |
| Grinding and gouge power |
18.5kW |
| Grinding & gouge head weight |
650kg |
| Dust remove system |
|
| Power |
3.0KW |
| Air flow |
4000m3/h |
| (Ptf)Pressure |
2200pa |
| Inlet diameter |
170mm |
| Outlet diameter |
330mm |
| Precipitation tank volume |
0.2 m3 |
| Dust removal efficiency |
85% |
III.Packing&shipping
We will provide professional export packaging and choose the appropriate mode of transportation, or we can follow the requirements of customers.
IV.After sale service
Professional technical support and product quality assurance.
V.Company production
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
VI.Our advantages
*We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.
*Based client's facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.
*To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
VII.Product photos
Audited Supplier 
){kind=link}
){kind=link}